Shop
GMR PPA-CF
GMR PPA-CF is a high-performance carbon composite filament formulated for the production of serious engineering and automotive-grade components. Developed around the same material class used in our own high-end composite parts, it offers exceptional stiffness, strong heat resistance, and the process
£84.99
GMR Air filter
Quick and easy replacement Made to suit our 4 cylinder air boxes these are replacable by removing the three M4 bolts and mounting the replacement. Motorsport Grade filtration High quality, twin layer, fully reticulated and polymer-impregnated foam designed for maximum dust filtration, high air
£50.00
GMR Throttle Body Idle Vacuum Manifold
GMR designed and manufactured compact throttle body Idle vacuum manifoldIdle control built in: Built into the end of the manifold is our standard idle valve control unit allowing the use 19mm filter or 19mm hose to an airbox.Multiple inputs/outputs: As standard there are 4×1/4″ barbed adapters to
£95.00
IAT Sensor M10
GMR fast-response IAT (intake air temperature) sensor. M10 thread, mini-timer connector. Used in all GMR ITB kits.
£24.95
GMR Airbox for Jenvey & DCOE type throttle bodies
Advanced Carbon Composite airboxManufactured using Carbon IDT, (Carbon Infused Digital Technology), high-strength carbon composite, this airbox is super lightweight and exceptionally insulative.Airbox featuresMade for Jenvey/DCOE throttle bodies with M6 velocity stack mountingGreat for clearin
£200.00
GMR Airbox for Jenvey OBX SF Type Throttle Bodies
Advanced Carbon Composite airbox Manufactured using Carbon IDT, (Carbon Infused Digital Technology), high-strength carbon composite, this airbox is super lightweight and exceptionally insulative. Airbox features Made for Jenvey/OBX SF throttle bodies with M5 velocity stack mountingGreat for clear
£200.00
Peugeot 205/306 GMR Airbox for Jenvey & DCOE type throttle bodies
Advanced Carbon Composite airboxManufactured using Carbon IDT, (Carbon Infused Digital Technology), high-strength carbon composite, this airbox is super lightweight and exceptionally insulative.Airbox featuresMade for Jenvey/DCOE throttle bodies with M6 velocity stack mounting to clear the bon
£200.00
Bosch EV14S 550cc Injectors
Bosch EV14S Injectors sold individually Flow rate: 550cc at 3 bar Type: EV14S / thin / Standard Spray pattern: 6-jet fine Ohm value: 12 – 15 Ohm (high-impedance) Manufacturer: BOSCH Plug connector: Delphi Length center O-ring to center O-ring: 52 mm Total length over all: 65 mm
£60.00
Bosch “Green Giant” 465cc Injectors
Bosch “Green Giant” Injectors sold individually Flow rate: 465cc at 3 bar Type: EV14L / Long Spray pattern: 4-hole disc Ohm value: 14.2 Ohm (high-impedance) Manufacturer: BOSCH Plug connector: 2-Way JPT Length center O-ring to center O-ring: 60 mm Total length overall: 74 mm
£45.00
Honda K20 SF OBX Short Manifold
Advanced Carbon Composite Intake Manifold (Carbon IDT) Made to order using Carbon IDT (Carbon Infused Digital Technology), this high-strength carbon composite intake is ultra-lightweight, highly insulating, and finished internally with a specialist ultra-low friction sealing coat to maximise airflow
from £275.00
Peugeot GTi6 XU10J4RS Mi16 XU9J4 DCOE Intake Manifold
Advanced Carbon Composite Intake Manifold (Carbon IDT) – DCOEMade to order using Carbon IDT (Carbon Infused Digital Technology), this high-strength carbon composite intake is ultra-lightweight, highly insulating, and internally finished with a specialist ultra-low friction sealing coat to maximise
from £340.00
Peugeot GTi6 XU10J4RS Mi16 XU9J4 SF OBX Intake Manifold
Advanced Carbon Composite Intake Manifold (Carbon IDT)Made to order using Carbon IDT (Carbon Infused Digital Technology), this high-strength carbon composite intake is ultra-lightweight, highly insulating, and finished internally with a specialist ultra-low friction sealing coat to maximise airflow
from £340.00
Peugeot GTi6 XU10J4RS Mi16 XU9J4 Short DCOE Manifold
Advanced Carbon Composite Intake Manifold (Carbon IDT) Manufactured using Carbon IDT, (Carbon Infused Digital Technology), high-strength carbon composite, this intake manifold is super lightweight, exceptionally insulative, and finished with a specialist ultra-low friction internal sealing coat to m
from £235.00
GMR OBX, SF Type throttle bodies
Single port bodies: Allows a wide variaty of cylinder/port spacings to be catered for. Short bodies: A relatively short body at a nominal diameter serves as a minimal restriction compared to more conventional DCOE throttle types. Injector options: We offer these with a variety of injector flow r
from £150.00
Honda K20 Race/Kit car ITB Kit
Advanced Carbon Composite ITB kit Manufactured using Carbon IDT, (Carbon Infused Digital Technology), high-strength carbon composite, this intake system kit is super lightweight and exceptionally insulative. Our Honda K20 kit requires no disassembly of our kit before bolting onto the engine. (Remova
from £1200.00
Peugeot 205/306 GTi6 Mi16 ITB Kit
Performance Advantages Unlock up to 20% more power potential with appropriate engine setup and calibration Reduce intake air temperatures by up to 15°C under typical operating conditions through thermally insulating carbon construction Fully tapered runners improve airflow stability and cylinder fi
from £1200.00
GMR Jenvey SF Throttle Linkage
Our throttle linkage for Jenvey SF throttle bodies replaces the conventional throttle lever with a non linear progression quadrant which increases control at low throttle openings. This system increases usability, smoothness and vastly reduces throttle linkage complexity.
£50.00
GMR SF Throttle Linkage
Our throttle linkage for our SF/OBX throttle bodies replaces the conventional throttle lever with a non linear progression quadrant which increases control at low throttle openings. This system increases usability, smoothness and vastly reduces throttle linkage complexity.
£50.00
GMR TPS sensor and adapter
Our own TPS and adaptor plate to allow fitment to either end of a spindle.
£50.00
GMR Throttle Cable Nipple
GMR 6mm solderless nipple for 2mm throttle cables.
£2.50
GMR Velocity Stacks/Air Horns/ Trumpets Straight Bolt on
Super-lightweight carbon composite velocity stack.Up to 5,000× more heat-insulative than aluminium, keeping intake temps lower for more consistent power.Direct bolt-on fit with the common M5 × 65 mm Jenvey/Weber mounting spacing.Made to order – please allow 7-10 days for manufacture before shipme
from £25.00